- Rasay, H.; Naderkhani, F. & F. Azizi, (2022). “Opportunistic maintenance integrated model for a two-stage manufacturing process”. International Journal of Advanced Manufacturing Technology, vol. 119, no. 11–12, pp. 8173–8191, doi: 10.1007/s00170-021-08571-5.
- Azizi F. & Salari, N., (2023). “A novel condition-based maintenance framework for parallel manufacturing systems based on bivariate birth/birth–death processes”. Reliab Eng Syst Saf, vol. 229, p. 108798, doi: 10.1016/j.ress.2022.108798.
- Ahmad, R. & Kamaruddin, S., (2012). “An overview of time-based and condition-based maintenance in industrial application”. Comput Ind Eng, vol. 63, no. 1, pp. 135–149, 2012, doi: 10.1016/j.cie.2012.02.002.
- Ding, S. & Kamaruddin, S., (2015). “Maintenance policy optimization — literature review and directions”. international journal of advanced manufacturing technology, vol. 76, pp. 1263–1283, doi: 10.1007/s00170-014-6341-2.
- Rasay, H.; Fallahnezhad, M. S. & Zaremehrjerdi, Y., (2019). “An integrated model of statistical process control and maintenance planning for a two-stage dependent process under general deterioration”. European Journal of Industrial Engineering, vol. 13, no. 2, doi: 10.1504/EJIE.2019.098508.
- Panagiotidou, S. & Tagaras, G., (2012). “Optimal integrated process control and maintenance under general deterioration”. Reliab Eng Syst Saf, vol. 104, pp. 58–70, doi: 10.1016/j.ress.2012.03.019.
- Tasias, K. A. & Nenes, G., (2018). “Optimization of a fully adaptive quality and maintenance model in the presence of multiple location and scale quality shifts”. Appl Math Model, vol. 54, pp. 64–81, doi: 10.1016/j.apm.2017.09.014.
- Mohammad Hadian, S.; Farughi, H. & Rasay, H., (2023). “Development of a simulation-based optimization approach to integrate the decisions of maintenance planning and safety stock determination in deteriorating manufacturing systems”. Comput Ind Eng, vol. 178, doi: 1016/j.cie.2023.109132.
- Farahani, A. & Tohidi, H., (2021). “Integrated optimization of quality and maintenance: A literature review”. Comput Ind Eng, vol. 151, doi: 10.1016/j.cie.2020.106924.
- Rasay, H.; Taghipour, S. & Sharifi, M., (2022). “An integrated Maintenance and Statistical Process Control Model for a Deteriorating Production Process”. Reliab Eng Syst Saf, vol. 228, p. 108774, doi: 10.1016/j.ress.2022.108774.
- AlDurgam, M. M. & Duffuaa, S. O., (2013). “Optimal joint maintenance and operation policies to maximise Overall Systems Effectiveness”. Int J Prod Res, vol. 51, no. 5, pp. 1319–1330, doi: 10.1080/00207543.2012.659351.
- Taji, J.; Farughi, H. & Rasay, H., (2023). “An integrated Markov chain model for the economic-statistical design of adaptive multivariate control charts and maintenance planning”. European J. of Industrial Engineering, vol. 17, no. 1, p. 1, doi: 10.1504/EJIE.2023.127739.
- Panagiotidou, S. & Nenes, G., (2009). “An economically designed, integrated quality and maintenance model using an adaptive Shewhart chart”. Reliab Eng Syst Saf, vol. 94, no. 3, pp. 732–741, doi: 10.1016/j.ress.2008.07.003.
- Yousefi, N.; Tsianikas, S. & Coit, D. W., (2022). “Dynamic maintenance model for a repairable multi-component system using deep reinforcement learning”. Qual Eng, vol. 34, no. 1, pp. 16–35, doi: 10.1080/08982112.2021.1977950.
- Yin, H.; Zhang, G.; Zhu, H.; Deng, Y. & He, F., (2015). “An integrated model of statistical process control and maintenance based on the delayed monitoring”. Reliab Eng Syst Saf, vol. 133, pp. 323–333, doi: 10.1016/j.ress.2014.09.020.
- Shrivastava, D.; Kulkarni, M. S. & Vrat, P., (2016). “Integrated design of preventive maintenance and quality control policy parameters with CUSUM chart”. International Journal of Advanced Manufacturing Technology, vol. 82, no. 9–12, pp. 2101–2112, doi: 10.1007/s00170-015-7502-7.
- Charongrattanasakul, P. & Pongpullponsak, A., (2011). “Minimizing the cost of integrated systems approach to process control and maintenance model by EWMA control chart using genetic algorithm”. Expert Syst Appl, vol. 38, no. 5, pp. 5178–5186, doi: 10.1016/j.eswa.2010.10.044.
- Abouei Ardakan, M.; Zeinal Hamadani, A.; Sima, M. & Reihaneh, M., (2016). “A hybrid model for economic design of MEWMA control chart under maintenance policies”. The International Journal of Advanced Manufacturing Technology, vol. 83, no. 9–12, pp. 2101–2110, doi: 10.1007/s00170-015-7716-8.
- Liu, L.; Jiang, L. & Zhang, D., (2017). “An integrated model of statistical process control and condition-based maintenance for deteriorating systems”. Journal of the Operational Research Society, pp. 1–9, doi: 10.1057/s41274-016-0175-2.
- Rasay, H.; Hadian, S. M.; Naderkhani, F. & Azizi, F., (2023). “Optimal condition based maintenance using attribute Bayesian control chart”. Proc Inst Mech Eng O J Risk Reliab, doi: 10.1177/1748006X231174960.
- Xiang, Y., (2013). “Joint optimization of X -bar control chart and preventive maintenance policies: A discrete-time Markov chain approach”. Eur J Oper Res, vol. 229, no. 2, pp. 382–390, doi: 10.1016/j.ejor.2013.02.041.
- Naderkhani, ZG, F.& Makis, V., (2015). “Optimal condition-based maintenance policy for a partially observable system with two sampling intervals”. International Journal of Advanced Manufacturing Technology, vol. 78, no. 5–8, pp. 795–805, doi: 10.1007/s00170-014-6651-4.
|
