آمار
| تعداد نشریات | 22 |
| تعداد شمارهها | 490 |
| تعداد مقالات | 5,109 |
| تعداد مشاهده مقاله | 9,394,169 |
| تعداد دریافت فایل اصل مقاله | 6,205,193 |
Transient Coupled Hygrothermal Stress Analysis of a Finite Length Functionally Graded Hollow Cylinder | ||
| Journal of Stress Analysis | ||
| دوره 6، شماره 1، 2021، صفحه 89-103 اصل مقاله (6.61 M) | ||
| نوع مقاله: Original Research Paper | ||
| شناسه دیجیتال (DOI): 10.22084/jrstan.2021.24755.1189 | ||
| نویسنده | ||
| M. Saadatfar* | ||
| Mechanical Engineering Department, University of Qom, Qom, Iran. | ||
| چکیده | ||
| The Distribution of displacements and stresses in a finite length hollow cylinder made of Functionally Graded Material (FGM) subjected to coupled hygrothermal loading was investigated. The simply supported cylinder was under a transient coupled hygrothermal loading. Furthermore, the internal pressure and viscoelastic foundation can be considered for the cylinder. The coupled equations of heat and moisture transfer and motion equations of the cylinder were solved employing the Fourier series expansion method, the Differential Quadrature Method (DQM), and the Newmark method along the longitudinal direction, the radial direction, and the time domain, respectively. Finally, the distribution of temperature, humidity, deformations, and stresses was obtained. The effects of coupled and uncoupled hygrothermal loading, grading index, hygrothermal boundary condition, and viscoelastic foundation are illustrated in the numerical examples. The results show that the FGM cylinder touches the temperature balance before using the uncoupled model rather than the coupled model. Moreover, by serving the time, the radial displacement, and maximum hoop stress increase, and longitudinal displacement decreases to reach steady-state condition. | ||
| کلیدواژهها | ||
| Coupled hygrothermal؛ Transient response؛ Functionally graded material؛ Hollow cylinder؛ Differential quadrature method | ||
| مراجع | ||
|
[1] M. Saadatfar, M.H. Zarandi, Deformations and stresses of an exponentially graded magnetoelectro-elastic non-uniform thickness annular plate which rotates with variable angular speed, Int. J. Appl. Mech., 12(5) (2020) 2050050. [2] M. Saadatfar, M.H. Zarandi, Effect of angular acceleration on the mechanical behavior of an exponentially graded piezoelectric rotating annular plate with variable thickness, Mech. Based Des. Struct. Mach., (2020). DOI:10.1080/15397734.2020.1751198. [3] M. Saadatfar, M.H. Zarandi, M. Babaelahi, Effects of porosity, profile of thickness, and angular acceleration on the magneto-electro-elastic behavior of a porous FGMEE rotating disc placed in a constant magnetic field, Proceedings of the Institution of Mechanical Engineers, Proc. Inst. Mech. Eng., Part C, 235(7) (2020) 1241-1257. [4] M. Shaban, H. Mazaheri, Size-dependent electrostatic analysis of smart micro-sandwich panels with functionally graded core, Acta Mech., 232(1) (2021) 111-133. [5] M. Shaban, H. Mazaheri, Bending analysis of fivelayer curved functionally graded sandwich panel in magnetic field: Closed-form solution, Appl. Math. Mech., 42(2) (2021) 251-274. [6] M. Jabbari, S. Sohrabpour, M.R. Eslami, General solution for mechanical and thermal stresses in a functionally graded hollow cylinder due to nonaxisymmetric steady-state loads, J. Appl. Mech., 70(1) (2003) 111-118. [7] M. Jabbari, A.H. Mohazzab, A. Bahtui, M.R. Eslami, Analytical solution for three-dimensional stresses in a short length FGM hollow cylinder, Appl. Math. Mech, 87(6) (2007) 413-429. [8] Y. Ootao, Y. Tanigawa, Transient thermoelastic problem of a functionally graded hollow cylinder due to asymmetrical surface heating, J. Therm. Stresses, 32(12) (2009) 1217-1234. [9] M. Asgari, M. Akhlaghi, Transient heat conduction in two-dimensional functionally graded hollow cylinder with finite length, Heat Mass Transf., 45(11) (2009) 1383-1392. [10] A. Loghman, A. Ghorbanpour Arani, S. Amir, A. Vajedi, Magnetothermoelastic creep analysis of functionally graded cylinders, Int. J. Press. Vessel. Pip., 87(7) (2010) 389-395. [11] H.L. Dai, and Y.N. Rao, Vibration and transient response of a FGM hollow cylinder, Adv. Mater. Struct., 21(6) (2014) 468-476. [12] M. Zamani Nejad, M. Davoudi Kashkoli, Timedependent thermo-creep analysis of rotating FGM thick-walled cylindrical pressure vessels under heat flux, Int. J. Eng. Sci., 82 (2014) 222-237. [13] M. Jabbari, M. Zamani Nejad, M. Ghannad, Thermo-elastic analysis of axially functionally graded rotating thick cylindrical pressure vessels with variable thickness under mechanical loading, Int. J. Eng. Sci., 96 (2015) 1-18. [14] M. Davoudi Kashkoli, K. Naderan Tahan, M. Zamani Nejad, Time-dependent thermomechanical creep behavior of FGM thick hollow cylindrical shells under non-uniform internal pressure, Int. J. Appl. Mech., 9(6) (2017) 1750086. [15] A. Najibi, R. Talebitooti, Nonlinear transient thermo-elastic analysis of a 2D-FGM thick hollow finite length cylinder, Compos. B. Eng., 111 (2017) 211-227. [16] A. Najibi, Mechanical stress reduction in a pressurized 2D-FGM thick hollow cylinder with finite length, Int. J. Press. Vessel. Pip., 153 (2017) 32-44. [17] A. Hajisadeghian, A. Masoumi, A. Parvizi, Investigating the magnetic field effects on thermomechanical stress behavior of thick-walled cylinder with inner FGM layer, J. Therm. Stresses, 41(3) (2018) 286-301. [18] M. Saadatfar, Analytical solution for the creep problem of a rotating functionally graded magnetoelectro-elastic hollow cylinder in thermal environment, Int. J. Appl. Mech., 11(06) (2019) 1950053. [19] D. Yarımpabuç, Transient-thermoelastic analysis of periodically rotated functionally graded hollow cylinder, J. Eng. Math., 128(1) (2021) 18. [20] M. Jabbari, M. Zamani Nejad, Mechanical and thermal stresses in radially functionally graded hollow cylinders with variable thickness due to symmetric loads, Aust. J. Mech. Eng., 18(sup1) (2020) S108-S121. [21] A.H. Akbarzadeh, Z.T. Chen, Hygrothermal stresses in one-dimensional functionally graded piezoelectric media in constant magnetic field, Compos. Struct., 97 (2013) 317-331. [22] M.N.M. Allam, A.M. Zenkour, R. Tantawy, Analysis of functionally graded piezoelectric cylinders in a hygrothermal environment, Adv. Appl. Math. Mech., 6(2) (2014) 233-246. [23] M. Saadatfar, M. Aghaie-Khafri, Hygrothermomagnetoelectroelastic analysis of a functionally graded magnetoelectroelastic hollow sphere resting on an elastic foundation, Smart Mater. Struct., 23(3) (2014) 035004. [24] M. Saadatfar, M. Aghaie-Khafri, Hygrothermal analysis of a rotating smart exponentially graded cylindrical shell with imperfect bonding supported by an elastic foundation, Aerosp. Sci. Technol., 43 (2015) 37-50. [25] M. Saadatfar, M. Aghaie-Khafri, On the behavior of a rotating functionally graded hybrid cylindrical shell with imperfect bonding subjected to hygrothermal condition, J. Therm. Stresses, 38(8) (2015) 854-881. [26] M. Saadatfar, Effect of multiphysics conditions on the behavior of an exponentially graded smart cylindrical shell with imperfect bonding, Meccanica, 50(8) (2015) 2135-2152. [27] M. Saadatfar, Effect of interlaminar weak bonding and constant magnetic field on the hygrothermal stresses of a FG Hybrid cylindrical shell using DQM, J. Stress Anal., 3(1) (2018) 93-110. [28] M. Saadatfar, Multiphysical time-dependent creep response of FGMEE hollow cylinder in thermal and humid environment, Mech. Time Depend. Mater., 25(2) (2021) 151-173. [29] M. Saadatfar, Stress redistribution analysis of piezomagnetic rotating thick-walled cylinder with temperature-and moisture-dependent material properties, J. Appl. Comput. Mech., 6(1) (2020) 90-104. [30] M. Saadatfar, Transient solution of heat and moisture transfer in a functionally graded hollow cylinder with finite length, Mech. Adv. Compos. Struct., Accepted for publication, (2022), DOI:10.22075/MACS.2022.24225.1355. [31] M. Saadatfar, Transient response of a hollow functionally graded piezoelectric cylinder subjected to coupled hygrothermal loading, Int. J. Appl. Mech., Accepted for publication, (2021), DOI:10.1142/S175882512150109X. [32] Y.C. Yang, S.S. Chu, H.L. Lee, S.L. Lin, Hybrid numerical method applied to transient hygrothermal analysis in an annular cylinder, Int. Commun. Heat Mass Transf., 33(1) (2006) 102-111. [33] H.L. Dai, Z.Q. Zheng, T. Dai, Investigation on a rotating FGPM circular disk under a coupled hygrothermal field, Appl. Math. Model., 46 (2017) 28-47. [34] T. Dai, Y. Yang, H.L. Dai, H. Tang, Z.Y. Lin, Hygrothermal mechanical behaviors of a porous FGCRC annular plate with variable thickness considering aggregation of CNTs, Compos. Struct., 215 (2019) 198-213. [35] Y. Peng, X.Y. Zhang, Y.J. Xie, X.F. Li, Transient hygrothermoelastic response in a cylinder considering non-Fourier hyperbolic heat-moisture coupling, Int. J. Heat Mass Transf., 126 (2018) 1094-1103. [36] Y. Peng, X.Y. Zhang, X.F. Li, Transient hygrothermoelastic response in a porous cylinder subjected to ramp-type heat-moisture loading, J. Therm. Stresses, 42(12) (2019) 1499-1514. [37] S.M. Kamal, U.S. Dixit, A. Roy, Q. Liu, V.V. Silberschmidt, Comparison of plane-stress, generalized-plane-strain and 3D FEM elastic–plastic analyses of thick-walled cylinders subjected to radial thermal gradient, Int. J. Mech. Sci., 131-132 (2017) 744-752. [38] M. Qin, A. Aït-Mokhtar, R. Belarbi, Twodimensional hygrothermal transfer in porous building materials, Appl. Therm. Eng., 30(16) (2010) 2555-2562. [39] Y. Rahmati Nezhad, K. Asemi, M. Akhlaghi, Transient solution of temperature field in functionally graded hollow cylinder with finite length using multi layered approach, Int. J. Mech. Mater. Des., 7(1) (2011) 71-82. [40] J. Eskandari Jam, Y. Rahmati Nezhad, Semianalytical solution of functionally graded circular short hollow cylinder subject to transient thermal loading, Archive of Mechanical Engineering, 61(3) (2014) 409-432. [41] A. Bakhshizadeh, M. Zamani Nejad, M. Davoudi Kashkoli, Time-dependent hygro-thermal creep analysis of pressurized FGM rotating thick cylindrical shells subjected to uniform magnetic field, J. Solid Mech., 9(3) (2017) 663-679. [42] N. Habibi, S. Samawati, O. Ahmadi, Transient thermal stresses analysis in a FPGM cylinder, Mech. Adv. Compos. Struct., 6(2) (2019) 81-94. [43] M. Gharibavi, J. Yi, Effect of hygro-thermal loading on the two-dimensional response of a functionally graded piezomagnetic cylinder under asymmetric loads, Scientia Iranica, 27(4) (2020) 1916-1932. [44] M.H. Jalaei, A. Ghorbanpour Arani, Sizedependent static and dynamic responses of embedded double-layered graphene sheets under longitudinal magnetic field with arbitrary boundary conditions, Compos. B. Eng., 142 (2018) 117-130. [45] A.M. Zenkour, M. Arefi, Nonlocal transient electrothermomechanical vibration and bending analysis of a functionally graded piezoelectric single-layered nanosheet rest on visco-Pasternak foundation, J. Therm. Stresses, 40(2) (2017) 167-184. | ||
|
آمار تعداد مشاهده مقاله: 440 تعداد دریافت فایل اصل مقاله: 273 |
||