Abdi, Y., Khanlari, G. R (2018) Investigation of effect of freeze-thaw on mechanical properties of Upper Red Formation sandstones based on measurement of P-wave velocity and porosity. New Finding in Applied Geology, 12: 75–91. doi.org/10.22084/nfag.2017.13399.1254 (in persian).

Akin, M., Özsan, A (2011) Evaluation of the long-term durability of yellow travertine using accelerated weathering tests. Bulletin of Engineering Geology and the Environment, 70: 101–114. doi.org/10.1007/s10064-010-0287-x.

Al-Harthi, A. A., AI-Amri, R. M., Shehata, W. M (1999) The porosity and engineering properties of vesicular basalt in Saudi Arabia. Engineering Geology, 54: 313–320. doi.org/10.1016/S0013-7952(99)00050-2.

Anon (1979) Classification of rocks and soils for engineering geological mapping, part 1: Rock and soil materials. Bulletin of Engineering Geology and the Environment, 19: 355–371. doi.org/10.1007/BF02600503.

Azimian, A., Ajalloeian, R (2015) Empirical correlation of physical and mechanical properties of marly rocks with P wave velocity. Arabian Journal of Geosciences, 8: 2069–2079. doi.org/10.1007/s12517-013-1235-4.

Bahrami, Sh., Sarikhani, R., Jamshidi, A., Ghassemi Dehnavi, A., Emami Mybodi, M.R (2023) A comparative study of the effects of sodium and magnesium sulfates on the physico-mechanical characteristics of Abasabad travertine, Mahallat, Urumieh-Dokhtar Magmatic Belt, Iran. Environmental Earth Science, 82: 92. doi.org/10.1007/s12665-023-10757-x.

Benavente, D., Martinez, J., Cueto, N., Cura, M. A (2007) Salt weathering in dual-porosity building dolostones. Engineering Geology, 94: 215–226. doi.org/10.1016/j.enggeo.2007.08.003.

Broch, E., Franklin, J. A (1972) The point-load strength test. International Journal of Rock Mechanics and Mining Sciences, 6: 669–676. doi.org/10.1016/0148-9062(72)90030-7.

Celik, M. Y., Sert, M (2020) Accelerated aging laboratory tests for the evaluation of the durability of hydrophobic treated and untreated andesite with respect to salt crystallization, freezing–thawing, and thermal shock. Bulletin of Engineering Geology and the Environment, 79: 3751–3770. doi.org/10.1007/s10064-020-01776-0.

Demirdag, S (2013) Effects of freezing–thawing and thermal shock cycles on physical and mechanical properties of filled and unfilled travertines. Construction and Building Materials, 47: 1395–1401. doi.org/10.1016/j.conbuildmat.2013.06.045.

Fener, M., Kahraman, S., Bilgil, A., Gunaydin, O (2005) A comparative evaluation of indirect methods to estimate the compressive strength of rocks. Rock Mechanics and Rock Engineering, 38: 329–343. doi.org/10.1007/s00603-005-0061-8.

Fereidooni, D., Khajevand, R (2019) Utilization of the accelerated weathering test method for evaluating the durability of sedimentary rocks. Bulletin of Engineering Geology and the Environment, 78: 2697–2716. doi.org/10.1007/s10064-018-1267-9.

Fu, Y., Yuan, W., Liu, X (2018) Deterioration rules of strength parameters of sandstone under cyclical wetting and drying in acid-based environment. Rock and Soil Mechanics, 39: 3331–3339. doi.org/10.16285/j.rsm.2016.2711.

Ge, S., Shi, B., Zhang, S.,  Zhai, X., Chunlei Wu, C (2022) Thermal damage and mechanical properties of high temperature sandstone with cyclic heating–cooling treatment. Bulletin of Engineering Geology and the Environment, 81: 284. doi.org/10.1007/s10064-022-02781-1.

Ghobadi, M. H., Babazadeh, R (2015) Experimental studies on the effects of cyclic freezing-thawing, salt crystallization, and thermal shock on the physical and mechanical characteristics of selected sandstones. Rock Mechanics and Rock Engineering, 48: 1001–1016. doi.org/10.1007/s00603-014-0609-6.

Goodman, R. E (1989) Introduction to Rock Mechanics. Wiley, New York.

Gupta, A. S., Rao, K. S (1998) Index properties of weathered rocks: inter-relationships and applicability. Bulletin of Engineering Geology and the Environment, 57: 161–172. doi.org/10.1007/s100640050032.

Gupta, V., Ahmed, I (2007) The effect of PH of water and mineralogical properties on the slake durability (degradability) of different rocks from the Lesser Himalaya, India. Engineering Geology, 95: 79–87. doi.org/10.1016/j.enggeo.2007.09.004.

Hashemi, M., Bashiri Goudarzi, M., Jamshidi, A (2018) Experimental investigation on the performance of Schmidt hammer test in durability assessment of carbonate building stones against freeze-thaw weathering. Environmental Earth Science, 77, 684. doi.org/10.1007/s12665-018-7874-8.

Heidari, M., Khanlari, G. R., Torabi-Kaveh, M., Karegarian, S (2012) Predicting the uniaxial compressive and tensile strengths of gypsum rock by point load testing. Rock Mechanics and Rock Engineering, 45: 265–273. doi.org/10.1007/s00603-011-0196-8.

Heidari, M., Torabi-Kaveh, M., Mohseni, H (2016) Artificial weathering assessment of Persepolis stone due to heating to elucidate the effects of the burning of Persepolis. Bulletin of Engineering Geology and the Environment, 75: 979–992. doi.org/10.1007/s10064-016-0887-1.

Hu, X., Sun, Q., Wang, S., Wei, S., Ding, X., Zhao, X (2022) Study on deterioration characteristics of combustion metamorphic rocks under dry–wet cycling. Bulletin of Engineering Geology and the Environment, 81: 467. doi.org/10.1007/s10064-022-02966-8.

Huo, R., Li, J., Xin, H.W., Wang, B (2016) Regularity analysis on corrosion progressive and physical–chemical characteristic of sandstone subjected to acid rain. Journal of Xi'an University of Architecture and Technology, 48:165–170. doi.org/10.15986/j.1006-7930.2016.02.003.

ISRM (1981) Rock characterization testing and monitoring. In: Brown ET (ed) ISRM suggested methods. Pergamon Press, Oxford.

Jamshidi, A (2022) A comparative study of point load index test procedures in predicting the uniaxial compressive strength of sandstones. Rock Mechanics and Rock Engineering, 55: 4507–4516. doi.org/10.1007/s00603-022-02877-w.

Jamshidi, A., Nikudel, M. R., Khamehchiyan, M., Sarikhani, R (2020) Durability assessment of travertenes against salt weathering: an experimental study. New Finding in Applied Geology, 14: 1–15. doi.org/10.22084/nfag.2019.17907.1347 (in persian).

Jamshidi, A., Zamanian, H., Zarei Sahamieh, R (2018) The effect of density and porosity on the correlation between uniaxial compressive strength and P-wave velocity. Rock Mechanics and Rock Engineering, 51: 1279–1286. doi.org/10.1007/s00603-017-1379-8.

Jha, M. K., Verma, A. K., Maheshwar, S., Chauhan, A (2016) Study of temperature effect on thermal conductivity of Jhiri shale from Upper Vindhyan, India. Bulletin of Engineering Geology and the Environment, 75: 1657–1668. doi.org/10.1007/s10064-015-0829-3.

Kahraman, S., Fener, M., Gunaydin, O (2017) Estimating the uniaxial compressive strength of pyroclastic rocks from the slake durability index. Bulletin of Engineering Geology and the Environment, 76: 1107–1115. doi.org/10.1007/s10064-016-0893-3.

Kayabali, K., Beyaz, T., Kolay, E (2006) The effect of the pH of the testing liquid on the slake durability of gypsum. Bulletin Engineering Geology and the Environment, 65: 65–71. doi.org/10.1007/s10064-005-0027-9.

Khan, N. M., Ma, L., Cao, K. Hussain, S., Ali, A., Liu, W., Alarifi, S. S., Sultan shah, K., Khan, S., Yang Xiaoxu, Y., Xu, Y (2020) Evaluating the thermal-cooling induced effects on the Ambela granite properties (from Pakistan) using experimental and image processing techniques. Bulletin Engineering Geology and the Environment, 81: 506. doi.org/10.1007/s10064-022-03019-w.

Khanlari, G., Abdilor, Y (2015) Influence of wet–dry, freeze–thaw, and heat–cool cycles on the physical and mechanical properties of Upper Red sandstones in central Iran. Bulletin Engineering Geology and the Environment, 74: 1287–1300.

Lashkaripour, G. R (2002) Predicting mechanical properties of mudrock from index parameters. Bulletin Engineering Geology and the Environment, 61: 73–77. doi.org/10.1007/s100640100116.

Liu, Q., Qian, Z., Wu, Z (2019) Micro/macro physical and mechanical variation of red sandstone subjected to cyclic heating and cooling: an experimental study. Bulletin Engineering Geology and the Environment, 78: 1485–1499.

Liu, X., Jin, M., Li, D. Zhang, L (2018) Strength deterioration of a Shaly sandstone under dry–wet cycles: a case study from the Three Gorges Reservoir in China. Bulletin Engineering Geology and the Environment, 77: 1607–1621. doi.org/10.1007/s10064-017-1107-3.

Lorestan Meteorological Organization (2023). http://www.lorestanmet.ir (in persian)

Marques, E. A. G., Vargas, E. D. A., Antunes, F. S (2005) A study of the durability of some shales, mudrocks and siltstones from Brazil. Geotechnical and Geological Engineering, 23: 321–348. doi.org/10.1007/s10706-004-1605-5.

Özbek, A (2014) Investigation of the effects of wetting–drying and freezing–thawing cycles on some physical and mechanical properties of selected ignimbrites. Bulletin Engineering Geology and the Environment, 73: 595–609. doi.org/10.1007/s10064-013-0519-y.

Palchik, V., Hatzor, Y. H (2004) Influence of porosity on tensile and compressive strength of porous chalks. Rock Mechanics and Rock Engineering, 37: 331–341. doi.org/10.1007/s00603-003-0020-1.

Pappalardo, G (2015) Correlation between P-wave velocity and physical–mechanical properties of intensely jointed dolostones, Peloritani Mounts, NE Sicily. Rock Mechanics and Rock Engineering, 48: 1711–1721. doi.org/10.1007/s00603-014-0607-8.

Parvizpour, S., Jamshidi, A., Sarikhani, R. Ghassemi Dehnavi, A (2022) The pH effect of sulfuric acid on the physico-mechanical properties of Atashkuh travertine, Central Iran. Environmental Earth Sciences, 81: 159. doi.org/10.1007/s12665-022-10282-3.

Pirizadeh, S., Sarikhani, R., Jamshidi, A., Ghassemi Dehnavi, A (2022) Physico-mechanical properties of the sandstones and effect of salt crystallization on them: A comparative study between stable and unstable slopes (a case study of the Khorramabad-Zal highway in Iran). Case Studies in Construction Materials, 17: e01375. doi.org/10.1016/j.cscm.2022.e01375.

Sajadi, A (1998) Lorestan Pajohi. 1: 89–103 (in persian).

Singh, T. N., Kainthola, A., Venkatesh, A (2012) Correlation between point load index and uniaxial compressive strength for different rock types. Rock Mechanics and Rock Engineering, 45: 259–264. doi.org/10.1007/s00603-011-0192-z.

Sousa, L. M. O., Del Rio, L. M. S., Calleja, L., de Argandona, V. G. R., Rey, A. R (2005) Influence of microfraetures and porosity on the physieo-meehanieal properties and weathering of ornamental granites. Engineering Geology, 77: 153–168.

Taghipour, M., Nikudel, M. R., Farhadian, M. B (2016) Engineering properties and durability of limestones used in Persepolis complex, Iran, against acid solutions. Bulletin Engineering Geology and the Environment, 75: 967–978. doi.org/10.1007/s10064-015-0821-y.

Torabi-Kaveh, M., Heidari, M., Mohseni, H., Menendez, B (2019) Role of petrography in durability of limestone used in construction of Persepolis complex subjected to artificial accelerated ageing tests. Environmental Earth Sciences, 78: 297. doi.org/10.1007/s12665-019-8308-y.

Torabi-Kaveh, M., Mehrnahad, H., Morshedi, S., Jamshidi, A (2022) Investigating the durability of weak rocks to forecast their long-term behaviors. Bulletin Engineering Geology and the Environment, 81: 8. doi.org/10.1007/s10064-021-02504-y.

Tugrul, A., Zarif, I. H (1999) Correlation of mineralogical and textural characteristics with engineering properties of selected granitic rocks from Turkey. Engineering Geology, 51:303–317. doi.org/10.1016/S0013-7952(98)00071-4.

Weng, L., Wu, Z., Liu, Q (2020) Influence of heating/cooling cycles on the micro/macrocracking characteristics of Rucheng granite under unconfined compression. Bulletin Engineering Geology and the Environment, 79: 1289–1309. doi.org/10.1007/s10064-019-01638-4.

Yagiz, S (2011) P-wave velocity test for assessment of geotechnical properties of some rock materials. Bulletin of Materials Science, 34: 947–953. doi.org/10.1007/s12034-011-0220-3.

Yagiz, S (2018) The effect of pH of the testing liquid on the degradability of carbonate rocks. Geotechnical and Geological Engineering, 36: 2351–2363.

Yavuz, A. B., Topal, T (2016) Effects of different drying temperatures on the physical and mechanical properties of some marbles (Mugla, Turkey) during salt crystallization tests. Environmental Earth Sciences, 75: 982. doi.org/10.1007/s12665-016-5806-z.

Yavuz, H., Altindag, R., Sarac, S., Ugur, I., Sengun, N (2006) Estimating the index properties of deteriorated carbonate rocks due to freeze-thaw and thermal shock weathering. International Journal of Rock Mechanics and Mining Sciences, 43: 767–775. doi.org/10.1016/j.ijrmms.2005.12.004.

Yilmaz, I., Yuksek, G (2009) Prediction of the strength and elasticity modulus of gypsum using multiple regression, ANN, and ANFIS models. International Journal of Rock Mechanics and Mining Sciences, 46: 803–810. doi.org/10.1016/j.ijrmms.2008.09.002.

Zalooli, A., Khamehchiyan, M., Nikudel, M. R., Jamshidi, A (2017) Deterioration of travertine samples due to magnesium sulfate crystallization pressure: examples from Iran. Geotechnical and Geological Engineering, 35: 463–473. doi.org/10.1007/s10706-016-0120-9.

Zhao, F., Sun, Q., Zhang, W (2020) Combined effects of salts and wetting–drying cycles on granite weathering. Bulletin Engineering Geology and the Environment, 79: 3707–3720. doi.org/10.1007/s10064-020-01773-3.