بررسی اثرات دست خوردگی نمونه بر روی خصوصیات مقاومتی خاک رسی

Afrazi, M., and Yazdani, M (2019) Investigating the effect of disturbance on the results of direct shear test. National Conference on Civil Engineering and Architecture in 21st Century Urban Managemen, ISC96170-82101. (In Persian)

Afrazi, M., Yazdani, M., Talesh, M., and Fakhimi, A (2019) Numerical analysis of effective parameters in direct shear test by hybrid discrete – finite element method, Scientific Research Journal of Modares Civil Engineering, 18 (3): 13—24, (In Persian).

Alizade Majdi, A. R., and Dabiri, R (2019) Estimation of SPT test results using by probabilistic methods and artificial neural network in clay layers. ) case study: Clay layers of Tabriz, Advanced Applied Geology, doi.org/10.22055/ aag. 26391.1871. (In Persian).

Alizadeh Majdi, A. R., Dabiri, R., Ganjian, N., and Ghalandarzadeh, A (2020) Evaluation of the Specimen Disturbance Effects in the Consolidation Test Using Shear Wave Velocity, Geotechnical and Geological Engineering, 38: 2927–2943.

ASTM-D 2166 (2013) Standard test method for unconfined compressive strength of cohesive soils, Annual book of ASTM standards.

ASTM D6528 (2007) Standard Test Method For Consolidated Undrained Direct Simple Shear Testing Of Cohesive Soils, Annual book of ASTM standards.

ASTM D 854 (2002) Standard test method for specific gravity of soil solids by water pycnometer, Annual book of ASTM standards.

ASTM D422 (1963) Standard Test Method for article-Size Analysis of Soils, Annual book of ASTM standards (reapproved 1998).

ASTM D2216 (2019) Standard Test Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass, Annual book of ASTM standards.

ASTM D 4318 (1995) Standard test method for liquid limit, plastic limit an plasticity index for soils, Annual book of ASTM standards.

ASTM D2487 (1998) Classification of soils for engineering purposes unified soil classification system, Annual book of ASTM standards.

Golpasand, M. B., Nikoudel, M., Asghari, E., and Yasrebi, S. S (2007) Comparison of CPTu Test and Laboratory Test Results in Determination of Shear Strength of Uromieh Lake Bridge Site, Sceintific Quaterly Journal Geosciences, 15: 12-21 (In Persian). 

 

Holtz, R. D., and Kovacs, W. D (1981) An introduction to geotechnical engineering. Prentice-Hall, Englewood Cliffs.

Hooshmand, A., Aminfar, M. H., Asghari, E., and Ahmadi, H (2011) Mechanical and Physical Characterization of Tabriz Marls, Iran, Geotechnical and Geological Engineering, 30: 219-232. doi.org/10.1007/s10706-011-9464-3.

Karina, R. Dahl, K. R., Boulanger, R. W., DeJong, J. T., and Driller, M. W (2010) Effects of Sample Disturbance and Consolidation Procedures on Cyclic Strengths of Intermediate Soils. Fifth International Conference on recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, San Diego California. (https://scholarsmine.mst.edu/icrageesd).

Kontopoulos, N. S (2012) The effects of sample disturbance on preconsolidation pressure for normallconsolidated and overconsolidated clays. Massachusetts Institute of Technology, in Partial Fulfillment of the Requirements for the Degree of Doctor of Philosophy in the Field of Civil and Environmental Engineering. (http://hdl.handle.net/1721.1/74419).

Liang, Y., Cao L., and Lio, J (2015)  Statistical Correlations between SPT N-Values and Soil Parameters. Technical Report, Department of Civil Engineering, Ryerson University, (www.researchgate.net/publication/ 281109498).

Lunne, T., Berre T., Andersen, K. H., Sjursen, M., and Mortensen, N (2011) Effects of sample disturbance on consolidation behaviour of soft marine Norwegian clays. Canadian Geotechnical Journal, (https://doi: 10.1139/t06-040).

Ouhadi, V. R., Ghalandarzadeh, A., and Behnia, K (1993) Engineering characteristics and properties of marly soils.  Proceedings of the second international seminar on soil mechanics and foundation engineering of Iran, Tehran, Iran. (In Persian).

Parsa, Z., Asghari Kalajahi, E., and Hajialilou Bonab, M (2022) Investigating the problems of marly and sandy soils in Nagin Park area of Tabriz in the implementation of deep excavation projects, New Findings in Applied Geology, 15: 47-65,  doi: 10.22084/nfag.2021.22961.1438.

Ruge, C., Gómez, M., and Rojas, P (2019) Thixotropic behaviour study of clayey soils from the lacustrine deposits of Bogotá high plateau. 5th International Meeting for Researchers in Materials and Plasma Technology, doi: 10.1088/1742-6596/1386/1/012050.

Skemption, A. W.,  and Northey, R. D (1952) The sensitivity of clays. Géotechnique, doi:/10.1680/geot.3.1.30.

Shosh Pasha, E., Farhadi, A., and Barjeste, B (2005) Evaluating of the sensitivity and thixotropy of silty clay soil, First National Congress of Civil Engineering, Sharif University of Technology. (In Persian).

Terzaghi, K., Peck, R. B., and Mesri, G (1996) Soil Mechanics in Engineering Practice, John Wiley & Sons, Inc., New York

Touiti, L., Lmpe, W. V., and Bouassida, M (2009)  Discussion on Tunis soft soli sensitivity, Geotechnical and geological engineering, 27: 631-643, doi:10.1007s10706-009-9263-2.

Zhang, X., Kong, L., Md. And Sayem, H (2017)  Thixotropic mechanism of clay a microstructural investigation, Soils and Foundations, 57: 23-35,  doi: 10.1016/j.sandf.2017.01.002.