آمار
| تعداد نشریات | 22 |
| تعداد شمارهها | 485 |
| تعداد مقالات | 5,045 |
| تعداد مشاهده مقاله | 9,290,946 |
| تعداد دریافت فایل اصل مقاله | 6,135,385 |
Numerical Study on the Effect of Biaxial Surface Stresses on the Measurement Accuracy of Mechanical Properties in A516 Using Indentation | ||
| Journal of Stress Analysis | ||
| دوره 6، شماره 2، خرداد 2022، صفحه 47-57 اصل مقاله (16.68 M) | ||
| نوع مقاله: Original Research Paper | ||
| شناسه دیجیتال (DOI): 10.22084/jrstan.2022.25733.1201 | ||
| نویسندگان | ||
| F. Barati؛ R. Moharrami* | ||
| Mechanical Engineering Department, Engineering Faculty, University of Zanjan, Iran. | ||
| چکیده | ||
| Accuracy in determination of mechanical properties in industrial parts is a major issue in engineering. Various methods have been introduced to estimate the mechanical properties of the industrial parts, and each has its own features and limitations. The present research investigates the accuracy of Instrumented Indentation Technique (IIT) with Kim’s model in determining mechanical properties, including elastic modulus, yield stress, and work hardening of the A516 steel samples having surface stresses. To this end, some 3D simulations, using IIT on the steel sample with different surface stress state, were performed, and the method’s error in comparison to the initial assumed values were obtained. The results show that the surface stresses significantly affect the error in determining the materials’ properties, and the error in samples with tensile surface stress is more than that of samples with compressive one. To validate the results, some experimental samples with specified initial stress were prepared, which measured mechanical properties by the IIT and then were compared with the tensile test results. | ||
| کلیدواژهها | ||
| Mechanical properties؛ Surface stress؛ Instrumented indentation technique؛ Measurement accuracy | ||
| مراجع | ||
|
[1] M.F. Doerner, W.D. Nix, A method for interpreting the data from depth-sensing indentation instruments, J. Mater. Res., 1(4) (1986) 601-609. [2] A. Fischer-Cripps, Nanoindentation, 3 Edition, Springer New York, NY, (2011). [3] H. Lee, J.H. Lee, G.M. Pharr, A numerical approach to spherical indentation techniques for material property evaluation, J. Mech. Phys. Solids, 53(9) (2005) 2037-2069. [4] J.Y. Kim, K.W. Lee, J.S. Lee, D. Kwon, Determination of tensile properties by instrumented indentation technique: Representative stress and strain approach, Surf. Coat. Technol., 201(7) (2006) 4278-4283. [5] A. Boschetto, F. Quadrini, E.A. Squeo, Extracting local mechanical properties of steel bars by means of instrumented flat indentation, Meas., 44(1) (2011) 129-138. [6] H. Wang, A. Dhiman, H.E. Ostergaard, Y. Zhang, T. Siegmund, J.J. Kruzic, V. Tomar, Nanoindentation based properties of Inconel 718 at elevated temperatures: A comparison of conventional versus additively manufactured samples, Int. J. Plast., 120 (2019) 380-394. [7] L. Lu, M. Dao, P. Kumar, U. Ramamurty, G.E. Karniadakis, S. Suresh, Extraction of mechanical properties of materials through deep learning from instrumented indentation, Proc. Natl. Acad. Sci., 117(13) (2020) 7052-7062. [8] K.O. Kese, Z.C. Li, B. Bergman, Influence of residual stress on elastic modulus and hardness of soda-lime glass measured by nanoindentation, J. Mater. Res., 19(10) (2004) 3109-3119. [9] M. Zhao, X. Chen, J. Yan, A.M. Karlsson, Determination of uniaxial residual stress and mechanical properties by instrumented indentation, Acta Mater., 54(10) (2006) 2823-2832. [10] Y.C. Huang, S.Y. Chang, C.H. Chang, Effect of residual stresses on mechanical properties and interface adhesion strength of SiN thin films, Thin Solid Films, 517(17) (2009) 4857-4861. [11] M.K. Khan, M.E. Fitzpatrick, S.V. Hainsworth, L. Edwards, Effect of residual stress on the nanoindentation response of aerospace aluminium alloys, Comput. Mater. Sci., 50(10) (2011) 2967-2976. [12] G. Skordaris, K.D. Bouzakis, T. Kotsanis, P. Charalampous, E. Bouzakis, B. Breidenstein, B. Bergmann, B. Denkena, Effect of PVD film’s residual stresses on their mechanical properties, brittleness, adhesion and cutting performance of coated tools, J. Manuf. Sci. Technol., 18 (2017) 145-151. [13] L. Xiao, D. Ye, C. Chen, A further study on representativemodels for calculating the residual stress based on theinstrumented indentation technique, Comput. Mater. Sci., 82 (2014) 476-482. [14] J. Yan, A.M. Karlsson, X. Chen, Determining plastic properties of a material with residual stress by using conical indentation, Int. J. Solids Struct., 44(11-12) (2007) 3720-3737. [15] ISO, Metallic materials - Measurement of mechanical properties by an instrumented indentation test - Indentation tensile properties, in, ISO/TR29381, (2008). [16] S.H. Kim, B.W. Lee, Y. Choi, D. Kwon, Quantitative determination of contact depth during spherical indentation of metallic materials-A FEM study, Mater. Sci. Eng., A, 415(1-2) (2006) 59-65. [17] R. Moharrami, M. Sanayei, Improvement of indentation technique for measuring general biaxial residual stresses in austenitic steels, Precis. Eng., 64 (2020) 220-227. [18] Y.H. Lee, D. Kwon, Estimation of biaxial surface stress byinstrumented indentation with sharp indenters, J. Acta Mater., 52(6) (2004) 1555-1563. | ||
|
آمار تعداد مشاهده مقاله: 447 تعداد دریافت فایل اصل مقاله: 251 |
||