آمار
| تعداد نشریات | 22 |
| تعداد شمارهها | 485 |
| تعداد مقالات | 5,045 |
| تعداد مشاهده مقاله | 9,290,951 |
| تعداد دریافت فایل اصل مقاله | 6,135,387 |
Tensile Behavior of Damaged-steel Plate Strengthened by One-sided CFRP Patch in Acidic Environment | ||
| Journal of Stress Analysis | ||
| دوره 5، شماره 2، خرداد 2021، صفحه 73-82 اصل مقاله (2.67 M) | ||
| نوع مقاله: Original Research Paper | ||
| شناسه دیجیتال (DOI): 10.22084/jrstan.2021.23816.1175 | ||
| نویسندگان | ||
| A. Korminejad1؛ M. Kadkhodayan* 2؛ M.E. Golmakani1 | ||
| 1Department of Mechanical Engineering, Mashhad Branch, Islamic Azad University, Mashhad, Iran. | ||
| 2Mechanical Engineering Department, Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad, Iran. | ||
| چکیده | ||
| Today the adhesively bonded joint of FRP/steel for repair and strengthening are being widely used. In this case, investigating the effect of various mechanical loading, as well as harsh environmental conditions on this joint, is very important. In this paper, the strength of the damaged-steel plate reinforced with CFRP patches under acidic environment is investigated experimentally. The damage is considered in the shape of a central hole with two narrow central notches on two sides of the hole. In order to simulate more realistic conditions, the bonding of the patch to the steel plate is considered one-sidedly. To evaluate the amount of strengthening, the specimens are subjected to the simple tensile test at room temperature. The results of dry patched-specimens compared to non-patched specimens show significant reinforcement with at least 40% increase in load-carrying capacity and at least 50% increase in displacement. The comparison between the patched-specimens immersed for 8 weeks in concentrated sulfuric acid and the dry patched-specimens show no significant effect on the load-carrying capacity. However, the tests of standard CFRP specimens in a similar immersion environment show a reduction in modulus of elasticity and tensile strength compared to the dry CFRP ones. | ||
| کلیدواژهها | ||
| CFRP patch؛ Damage steel plate؛ Adhesively bonded joint؛ Acidic environment؛ Tensile behavior | ||
| مراجع | ||
|
[1] A.T. Echtermeyer, D. McGeorge, J.H.L. Grave, J. Weitzenböck, Bonded patch repairs for metallic structures–a new recommended practice, J. Reinf. Plast. Compos., 33(6) (2014) 579-585. [2] D. Linghoff, R. Haghani, M. Al-Emrani, Carbonfibre composites for strengthening steel structures, Thin-Walled Struct., 47(10) (2009) 1048-1058. [3] X.L. Zhao, L. Zhang, State-of-the-art review on FRP strengthened steel structures, Eng. Struct., 29(8) (2007) 1808-1823. [4] F. Nikouka, M.K. Lee, S.J. Moy, Strengthening of metallic structures using carbon fibre composites, IABSE Symposium Report: International Association for Bridge and Structural Engineering, 86(8) (2002) 121-127. [5] A.P. Kumar, R. Senthilm Axial behaviour of CFRP-strengthened circular steel hollow sections, Arab. J. Sci. Eng., 41 (2016) 3841-3850. [6] V. Fiore, L. Calabrese, T. Scalici, A. Valenza, Evolution of the bearing failure map of pinned flax composite laminates aged in marine environment, Composites, Part B, 187 (2020) 107864. [7] M. Elchalakani, D. Fernando, Plastic mechanism analysis of unstiffened steel I-section beams strengthened with CFRP under 3-point bending, Thin-Walled Struct., 53 (2012) 58-71. [8] M. Lindgren, M. Wallin, M. Kakkonen, O. Saarela, J. Vuorinen, The influence of high-temperature sulfuric acid solution ageing on the properties of laminated vinyl-ester joints, Int. J. Adhes. Adhes., 68 (2016) 298-304. [9] M. Heshmati, R. Haghani, M. Al-Emrani, Durability of bonded FRP-to-steel joints: Effects of moisture, de-icing salt solution, temperature and FRP type, Composites, Part B, 119 (2017) 153-167. [10] M. Nakayama, Y. Hosokawa, Y. Muraoka, T. Katayama, Life prediction under sulfuric acid environment of FRP using X-ray analysis microscope, J. Mater. Process. Technol., 155-156 (2004) 1558-1563. [11] I. Kafodya, G. Xian, H. Li, Durability study of pultruded CFRP plates immersed in water and seawater under sustained bending: Water uptake and effects on the mechanical properties, Composites, Part B, 70 (2015) 138-148. [12] F. Micelli, A. Nanni, Durability of FRP rods for concrete structures, Constr. Build. Mater., 18(7) (2004) 491-503. [13] P.R. Ciriscioli, W.I. Lee, D.G. Peterson, G.S. Springer, J.M. Tang, Accelerated environmental testing of composites, J. Compos. Mater., 21(3) (1987) 225-242. [14] Y. Wang, Y. Zheng, J. Li, L. Zhang, J. Deng, Experimental study on tensile behaviour of steel plates with center hole strengthened by CFRP plates under marine environment, Int. J. Adhes. Adhes., 84 (2018) 18-26. [15] M.H. Kabir, S. Fawzia, T.H.T. Chan, M. Badawi, Durability of CFRP strengthened steel circular hollow section member exposed to sea water, Constr. Build. Mater., 118 (2016) 216-225. [16] T. Liu, X. Liu, P. Feng, A comprehensive review on mechanical properties of pultruded FRP composites subjected to long-term environmental effects, Composites, Part B, (2020) 107958. [17] L.C. Bank, T.R. Gentry, A. Barkatt, Accelerated test methods to determine the long-term behavior of FRP composite structures: environmental effects, J. Reinf. Plast. Compos., 14(6) (1995) 559-587. [18] M.A.G. Silva, B.S. da Fonseca, H. Biscaia, On estimates of durability of FRP based on accelerated tests, Compos. Struct., 116 (2014) 377-387. [19] T. Gentry, L. Bank, A. Barkatt, L. Prian, Accelerated test methods to determine the long-term behavior of composite highway structures subject to environmental loading. Journal of Composites, Technol. Res., 20(1) (1998) 38-50. [20] M. Heshmati, R. Haghani, M. Al-Emrani, Environmental durability of adhesively bonded FRP/steel joints in civil engineering applications: state of the art, Composites, Part B, 81 (2015) 259-275. [21] Camattini spa Thermosetting Resins AS90. ELANTAS Co.: www.elantas.com. [22] X. Zhang, L. Zhu, M. Hu, Y. Liu, An analytical model and stress analysis of one-side bonded composite patch to metal reinforcement, Int. J. Adhes. Adhes., 58 (2015) 63-69. [23] S.K. Panigrahi, B. Pradhan, Three dimensional failure analysis and damage propagation behavior of adhesively bonded single lap joints in laminated FRP composites, J. Reinf. Plast. Compos., 26(2) (2007) 183-201. [24] J. Zhang, B. Bednarcyk, C. Collier, P. Yarrington, Y. Bansal, M.J. Pindera, 3D stress analysis of composite bonded joints. in: Proceedings of the 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, American Institute of Aeronautics and Astronautics, Inc. Austin, Texas, April, (2005). | ||
|
آمار تعداد مشاهده مقاله: 333 تعداد دریافت فایل اصل مقاله: 215 |
||