آمار
| تعداد نشریات | 22 |
| تعداد شمارهها | 490 |
| تعداد مقالات | 5,109 |
| تعداد مشاهده مقاله | 9,394,182 |
| تعداد دریافت فایل اصل مقاله | 6,205,194 |
Stress-strain Relationship for Steel Fiber-reinforced Lightweight Aggregate Concrete under Uniaxial Compression | ||
| Journal of Stress Analysis | ||
| مقاله 4، دوره 4، شماره 1، 2019، صفحه 43-52 اصل مقاله (2.65 M) | ||
| نوع مقاله: Original Research Paper | ||
| شناسه دیجیتال (DOI): 10.22084/jrstan.2019.18088.1077 | ||
| نویسندگان | ||
| H. Dabbagh* ؛ K. Amoorezaei | ||
| Department of Civil Engineering, University of Kurdistan, Sanandaj, Iran. | ||
| چکیده | ||
| The current study presents a series of tests on steel fiber-reinforced lightweight aggregate concrete (SFRLWAC) cylinders in order to develop a stress-strain model for SFRLWAC subjected to compressive monotonic loading. In this experiment, steel fiber ratios of 0, 0.5, 1, and 1.5 percent by volume of the sample were used in the mixtures. The findings show that adding steel fiber to the lightweight concrete has a slight impact on the ascending branch of the stress-strain curve; however, it has a noticeable influence on the descending branch. The peak stress, strain at peak stress, and modulus of elasticity were investigated. To this end, some equations were established. To predict the complete SFRLWAC stress-strain curve, a stress-strain model was introduced and the validity of the model was explored. There was a good agreement between the proposed model data and experimental findings. Using ABAQUS software, numerical simulation of the SFRLWAC beams subjected to monotonic loading was conducted; the simulated results had an acceptable agreement with the experimental data. | ||
| کلیدواژهها | ||
| Lightweight concrete؛ Steel fiber؛ Compressive behavior؛ Stress-strain model | ||
| مراجع | ||
|
[1] A.M. Neville, J.J. Brooks, Concrete technology, Harlow, Essex UKf: Longman Scientific & Technical, New York, John Wiley, (1987). [2] ACI Committee, Building code requirements for structural concrete (ACI 318-05) and commentary (ACI 318R-05). American Concrete Institute, (2005). [3] C.L. Hwang, M.F. Hung, Durability design and performance of self-consolidating lightweight concrete, Const. Build. Mater., 19(8) (2005) 619-626. [4] A. Bilodeau, V.K.R. Kodur, G.C. Hoff, Optimization of the type and amount of polypropylene fibres for preventing the spalling of lightweight concrete subjected to hydrocarbon fire, Cem. Concr. Compos., 6(2) (2004) 163-174. [5] K. Melby, E.A. Jordet, C. Hansvold, Long-span bridges in Norway constructed in high-strength LWA concrete, Eng. Struct., 18(11) (1996) 845-849. [6] A.K. Haug, S. Fjeld, A floating concrete platform hull made of lightweight aggregate concrete, Eng. Struct., 18(11) (1996) 831-836. [7] J.A. Rossignolo, M.V. Agnesini, J.A. Morais, Properties of high-performance LWAC for precast structures with Brazilian lightweight aggregates, Cem. Concr. Compos., 25(1) (2003) 77-82. [8] E. Yasar, C.D. Atis, A. Kilic, H. Gulsen, Strength properties of lightweight concrete made with basaltic pumice and fly ash, Mater. Lett., 57(15) (2003) 2267-2270. [9] M.N. Haque, H. Al-Khaiat, O. Kayali, Strength and durability of lightweight concrete, Cem. Concr. Compos., 26(4) (2004) 307-314. [10] M.H. Zhang, O.E. Gjvorv, Mechanical properties of high-strength lightweight concrete, ACI Mater. J., 88(3) (1991) 240-247. [11] T.P. Chang, M.M. Shieh, Fracture properties of lightweight concrete, Cem. Concr. Res., 26(2) (1996) 181-188. [12] G. Campione, N. Miraglia, M. Papia, Mechanical properties of steel fibre reinforced lightweight concrete with pumice stone or expanded clay aggregates, Mater. Struct., 34(4) (2001) 201-210. [13] T. Uygunoğlu, Investigation of microstructure and flexural behavior of steel-fiber reinforced concrete, Mater. Struct., 41(8) (2008) 1441-1449. [14] M. Hassanpour, P. Shafigh, H.B. Mahmud, Lightweight aggregate concrete fiber reinforcement–a review, Const. Build. Mater., 37 (2012) 452-461. [15] Y. Hao, H. Hao, G. Chen, Experimental investigation of the behaviour of spiral steel fibre reinforced concrete beams subjected to drop-weight impact loads, Mater. Struct., 49(1-2) (2016) 353-370. [16] K.H. Mo, S.H. Goh, U.J. Alengaram, P. Visintin, M.Z. Jumaat, Mechanical, toughness, bond and durability-related properties of lightweight concrete reinforced with steel fibres, Mater. Struct., 50(1)(2017) 46. [17] P. Suraneni, P.C.B. Anleu, R.J. Flatt, Factors affecting the strength of structural lightweight aggregate concrete with and without fibers in the 1,200-1,600kg/m3 density range, Mater. Struct., 49(1-2) (2016) 677-688. [18] A. Bentur, S. Mindess, Fibre reinforced cementitious composites, CRC Press, (2014). [19] P. Pierre, R. Pleau, M. Pigeon, Mechanical properties of steel microfiber reinforced cement pastes and mortars, J. Mater. Civ. Eng., 11(4) (1999) 317-324. [20] W. Abbass, M.I. Khan, S. Mourad, Evaluation of mechanical properties of steel fiber reinforced concrete with different strengths of concrete, Const. Build. Mater., 168 (2018) 556-569. [21] J. Thomas, A. Ramaswamy, Mechanical properties of steel fiber-reinforced concrete, J. Mater. Civ. Eng., 19(5) (2007) 385-392. [22] S. Popovics, A numerical approach to the complete stress-strain curve of concrete, Cem. Concr. Res., 3(5) (1973) 583-599. [23] P. Kumar, A compact analytical material model for unconfined concrete under uni-axial compression, Mater. Struct., 37(9) (2004) 585-590. [24] A.A. Tasnimi, Mathematical model for complete stress-strain curve prediction of normal, lightweight and high-strength concretes, Mag. Concr. Res., 56(1) (2004) 23-34. [25] M.C. Nataraja, N. Dhang, A.P. Gupta, Stress–strain curves for steel-fiber reinforced concrete under compression, Cem. Concr. Compos., 21(5-6) (1999) 383-390. [26] J.A.O. Barros, J.A. Figueiras, Flexural behavior of SFRC: testing and modeling, J. Mater. Civ. Eng., 11(4) (1999) 331-339. [27] A.S. Ezeldin, P.N. Balaguru, Normal-and highstrength fiber-reinforced concrete under compression, J. Mater. Civ. Eng., 4(4) (1992) 415-429. [28] P. Soroushian, C.D. Lee, Constitutive modeling of steel fiber reinforced concrete under direct tension and compression, In: R.N. Swamy, B. Barr, editors, Fiber reinforced cement and concrete recent developments, Cardiff, UK: University of Wales; Publication of: Elsevier Applied Science Publishers Limited, 18(20) (1989) 363-377. [29] H. Dabbagh, K. Amoorezaei, S. Akbarpour, K. Babamuradi, Compressive toughness of lightweight aggregate concrete containing different types of steel fiber under monotonic loading, AUT. J. Civ. Eng., 1(1) (2017) 15-22. [30] ASTM C330/C330M, Standard specification for lightweight aggregates for structural concrete, American Society for Testing and Materials, (2014). [31] K. Amoorezaei, Behavior of steel fiber reinforced lightweight concrete under compressive cyclic loading, MSc Thesis, Iran: University of Kurdistan, (2016). [32] ACI 211.2, Standard practice for selecting proportions for structural lightweight concrete, American Concrete Institute, 1998 (Reapproved 2004). [33] ASTM C469/C469M, Standard test method for static modulus of elasticity and Poisson’s ratio of concrete in compression, American Society for Testing and Materials, (2014). [34] ASTM C39/C39M, Standard test method for compressive strength of cylindrical concrete specimens, American Society for Testing and Materials, (2015). [35] P. Mehta, P.J.M. Monteiro, Concrete: microstructure, properties, and materials, McGraw-Hill Publishing, (2006). [36] D.J. Carreira, K.H. Chu, Stress-strain relationship for plain concrete in compression, ACI J. Proc., 82(6) (1985) 797-804. [37] N.A. Libre, M. Shekarchi, M. Mahoutian, P. Soroushian, Mechanical properties of hybrid fiber reinforced lightweight aggregate concrete made with natural pumice, Const. Build. Mater., 25(5) (2011) 2458-2464. [38] G. Campione, L. La Mendola, Behavior in compression of lightweight fiber reinforced concrete confined with transverse steel reinforcement, Cem. Concr. Compos., 26(6) (2004) 645-656. [39] S. Akbarpour, The effects of nano-silica and steel fibers on flexural behavior of reinforced lightweight aggregate concrete beams, PhD Thesis, Iran: University of Kurdistan, (2018). | ||
|
آمار تعداد مشاهده مقاله: 616 تعداد دریافت فایل اصل مقاله: 694 |
||