تاثیر ذرات گرانول لاستیک بازیافتی بر روی ویژگی های ژئوتکنیکی خاک رس

Asadzadeh, M. and Soltani Jigheh, H (2012) Swelling and Consolidation Properties of Clayey Soils Reinforced with Tire Chips, Journal of Civil Engineering, Ferdowsi University, 23 (2): 91-102. (In Persian)

ASTM D422-63 (1963) Standard Test Method for article-Size Analysis of Soils, Annual book of ASTM standards (reapproved 1998).

      ASTM D421-85 (1985) Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants, Annual book of ASTM standards, (reapproved 1998).

ASTM D 4318-95a (1995) Standard test method for liquid limit, plastic limit an plasticity index for soils, Annual book of ASTM standards.

ASTM-D 854-02 (2002) Standard test method for specific gravity of soil solids by water pycnometer, Annual book of ASTM standards.

ASTM-D 698-00 (2000) Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft³ (600 kN-m/m³)), Annual book of ASTM standards.

ASTM D2166-16 (2016) Standard Test Method for Unconfined Compressive Strength of Cohesive Soil, Annual book of ASTM standards.

ASTM D3080-11 (2011) Standard Test Method for Direct Shear Test of Soils under Consolidated Drained Conditions, Annual book of ASTM standards.

ASTM D5084-03 (2003) Standard test method for measurement of hydraulic conductivity of saturated porous materials using flexible wall permeameter, Annual book of ASTM standards.

Ayothiraman, R. and Meena, A. K (2011) Improvement of Subgrade Soil with Shredded Waste Tyre Chips, Proceeding of Indian Geotechnical Conference, 1-4

Bosscher, P. J., Edil, T. B., and Kuraoka, S (1997) Design of highway embankments using tire chips, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 123(4): 295-304.

Cetin, H., Fener, M. and Gunaydin, O (2006) Geotechnical properties of tire-cohesive clayey soil mixtures as a fill material", Engineering Geology, 88 (1–2):110-120.

Edil, T. and Bosscher, P (1994) Engineering properties of tire-chips and soil mixtures, Geotechnical Testing Journal, ASTM, 17(4):453-464.

Edil, T. B., Park, J. K. and Kim, Y. K (2004) Effectiveness of scrap tire chips as sportive drainage material, Journal of Environmental Engineering, ASCE, 130(7): 824-831.

Ersizad, A., Soltani Jigheh, H. and Asadzadeh, M (2015) Behavior of Clayey soils Mixed with Tire Chips, Journal of Civil Engineering, Ferdowsi University, 26(2): 117-130. (In Persian)

Iran China Clay Industries Company, Marand, East Azerbaijan, Iran. www.icckaolin.com.

Karamad Tabrizi, M., Abrishami, S. and Seyyedi Hosseini Nia, E (2015) Effects of Granules Tire on Clay Dry unit weight, 2^nd National conference in Soil Mechanics and Foundation Engineering, Qom University of Technology, 1-9. (In Persian).

Lee, J. H., Salgado, R., Bernal, A., and Lovell, C. W (1999) Shredded tires and rubber–sand as lightweight backfill, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 125:132-141.

Poh, P. S. H., and Broms, B. B (1995) Slope stabilization using oldrubber tires and geotextiles, Journal of Performance of Constructed Facilities, ASCE, 9(1): 76–80.

Rahgozar, M. A. and Saberian, M (2016) Geotechnical Properties of Peat Soil Stabilized with Shredded Waste Tire Chips, Mires and Peat, 18: 1-12.

Ratnam, A. V., Prasad, D. S. V., Prasada R., G. V. R. and Ratna, P. S (2016) Influence of Waste Tyre Rubber Chips on Strength and Settlements of Soils, International Journal of Engineering Innovation and Researches, 5(4): 282-287. 

Singh, J. and Sonthwal, K. V (2017) Improvement of Engineering Properties of Clayey Soil using Shredded Rubber Tube, International Journal of Theoretical and applied Sciences, 9(1): 1-6.

Solanki, D., Dave M. and Purohit D. G. M (2017) Stabilization of Clay Soil Mixed with Rubber Tyre Chips for Design in Road Construction, International Journal of Engineering Science Invention, 6(9): 2319-6734.

Vadi, P. K., Ganga, D., Priyadarsini, P. S. and Naga Bharath, Ch (2015) Experimental Investigation on California Bearing Ratio for Mechanically Stabilized Expansive Soil using Waste Rubber Tyre Chips, International Journal of Civil Engineering and Technology, 6(11): 97-110.

Warith, M. A., and Sudhakar, M. R (2006) Predicting the compressibility behaviour of tire shred samples for landfill applications, Waste Management, 26: 268-276.

Wu, W. Y., Benda, C. C. and Cauley, R. F (1997) Triaxial determination of shear strength of tire chips, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 123(5): 479-482.

Yang, S., Lohnes, R. A. and Kjartanson, B. H (2002) Mechanical properties of shredded tires, Geotechnical Testing Journal, ASTM, 25(1): 44-52.

Youwai, S. and Bergado, D. T (2004) Numerical analysis of reinforced wall using rubber tire chips-sand mixtures as backfill material, Computers and Geotechnics, 31(2): 103-114.

Zareh Sh., M (2011) Strategic Analysis in Tire Industry of Iran, Iran Rubber Magazine, 26:6-15. (In Persian).